HomeAllEntrepreneurshipSplit tunneling vs. full tunnel VPN: which should you use?

Split tunneling vs. full tunnel VPN: which should you use?

by | Oct 18, 2026 | All, Entrepreneurship

The short answer: a full-tunnel VPN sends all of your internet traffic through the encrypted VPN connection. Split tunneling sends only the traffic meant for your office or company network through the VPN, and everything else goes straight out over the network you’re on. Use a full tunnel on networks you don’t trust, like public Wi-Fi, and split tunneling on networks you do, like your home.

In this guide:

  • What a VPN does, in plain terms
  • The difference between a full tunnel and split tunneling, with a picture
  • When to use each one, and what each one costs you
  • Habits that keep you safe on public Wi-Fi, VPN or not

What does a VPN do?

A VPN, or virtual private network, is an encrypted tunnel between your device and another network you trust, like your company’s network. Everything you send through it is scrambled until it reaches the other end.

Without a VPN, your data crosses whatever network you’re sitting on, like a postcard anyone along the way could read. With a VPN, it travels in a locked box that only the other end can open. A VPN does three main things:

  • Encrypts your connection, so people on the same network can’t read your traffic or see which sites you visit.
  • Changes where you appear to be, because websites see the VPN network’s internet address, not the coffee shop’s.
  • Connects you to a private network, so you can reach office files and servers as if you were at your desk.

Which of those you get, and for which traffic, depends on one setting: full tunnel or split tunnel.

What’s the difference between a full tunnel and split tunneling?

  • Full tunnel: every bit of traffic from your device goes through the VPN, including your web browsing, which then leaves for the internet from the VPN’s network.
  • Split tunnel: only traffic headed for the office network uses the VPN. Your web browsing, video calls and streaming go straight out over the local network.

Switch between them below.


Full tunnel compared with split tunnel In full tunnel mode, both your office traffic and your web browsing travel through the encrypted VPN tunnel to your company’s network, and web traffic leaves for the internet from there. In split tunnel mode, only office traffic uses the tunnel; web browsing goes straight from the local network to the internet. Local network (home, coffee shop) VPN network You Router VPNgateway Office files Websites

Office traffic Web browsing
Full tunnel: everything goes through the encrypted tunnel, and your web browsing leaves from the VPN network.

Full tunnelSplit tunnel
Office files and serversThrough the VPNThrough the VPN
Web browsingThrough the VPN, then out to the webStraight out over the local network
Privacy from the local networkAll of your traffic is encryptedOnly office traffic is encrypted by the VPN
SpeedA little extra delay on web trafficWeb traffic runs at local speed
Home printers and devicesOften unreachable while connectedStill reachable
Best forPublic Wi-Fi and networks you don’t controlYour home and other networks you trust

When should you send all of your traffic through the VPN?

Use a full tunnel whenever you’re on a network you don’t control and can’t vouch for. That’s most networks away from home:

  • Coffee shops, hotels and airports. You share the network with strangers, and you can’t see who set it up or who’s watching it.
  • Client offices and conference centers. Their guest Wi-Fi is fine for them, but it isn’t yours.
  • Any network with no password, or a password posted on the wall. The Federal Trade Commission’s tips on public Wi-Fi warn that a network everyone can join isn’t a secure network.

What can someone on public Wi-Fi see?

  • Which sites you visit. Even when a site uses HTTPS, the network can often see the names of the sites you connect to.
  • Anything that isn’t encrypted. Older apps, some devices and sites without HTTPS send data in the clear.
  • Everything, on a fake hotspot. An attacker can set up a network named like the coffee shop’s and watch whatever connects to it.

A full tunnel solves all three: the local network sees only scrambled traffic headed to your VPN.

When does split tunneling make sense?

Use split tunneling on networks you trust, where the full tunnel’s privacy doesn’t buy you much and its trade-offs get in the way:

  • At home, on a Wi-Fi network you set up, with a strong password you haven’t shared with strangers.
  • On long video calls and big downloads, which run faster going straight to the internet than detouring through another network.
  • When you need local devices, like a home printer or a TV you cast to, that a full tunnel can hide from you.

The VPN still protects the part that matters most at home: the connection to your office files and servers.

Does a full tunnel slow down your internet?

A little. Your web traffic takes a detour through the VPN’s network before it reaches the website, which adds some delay. On a good VPN connection, you usually won’t notice it for email, browsing and cloud apps. You’re more likely to notice it on long video calls or very large downloads, which is one reason split tunneling exists.

Common mistakes

  • Leaving split tunneling on at the coffee shop. Your office traffic is protected, but your web browsing isn’t. Switch to full tunnel when you leave home.
  • Connecting the VPN after you open your email. Turn it on first; apps start syncing the moment you join a network.
  • Thinking a VPN makes you safe from everything. It doesn’t stop phishing emails, fake login pages, malware you download yourself, or weak and reused passwords. Websites still know who you are when you log in.

Five habits for working on public Wi-Fi

  1. Ask staff for the exact network name before you connect.
  2. Turn on your VPN, set to full tunnel, before you open anything for work.
  3. Use multi-factor authentication on your work accounts.
  4. Keep your laptop and phone updated.
  5. Turn off automatic joining of open networks, and forget the network when you leave.

Where Office Ours fits

Our business VPN is included with every Office Ours membership, with VPN access for each employee on laptops, phones and tablets. You choose the mode: full tunnel through the Office Ours network at the coffee shop, split tunnel at home. Office members can also reach their company’s private network from anywhere.

Frequently asked questions

What is split tunneling in a VPN?

Split tunneling is a VPN setting that sends only some of your traffic through the VPN, usually the traffic headed for your company’s network, and lets the rest go straight to the internet over the network you’re on.

Is split tunneling safe?

On a network you trust, like your home, split tunneling is a reasonable choice: your office traffic is still encrypted. On public Wi-Fi it’s riskier, because your web browsing isn’t protected by the VPN. Use a full tunnel there.

What is a full-tunnel VPN?

A full-tunnel VPN sends all of your device’s internet traffic through the encrypted VPN connection, so your web browsing leaves for the internet from the VPN’s network instead of the network you’re sitting on.

Should I use split tunneling at home?

Usually, yes, if your home Wi-Fi has a strong password you haven’t shared widely. You keep local speed for video calls and access to home devices, and your office traffic still goes through the VPN.

Sources

This guide is general information, not security advice for your specific business. If your company has an IT team, follow its VPN policy.

Latest News